SlipShaft™ Products          Online Retail Store

 

  1. SlipShaft™ KT Break-away Head- Designed for blue water use.

    • SlipShaft™ KT-312 Break-away Head (click to see photo)

      • Made with 17-4 stainless steel

      • Features 2 (two), 3" hard stainless steel flopper barbs*

      • Diameter=~5/16" (see photo for details)

      • Length=~8.5"

      • Weight (including 2 flopper barbs)=~100 grams

      • Recommended leash (tether) line type & size- 300#/400# mono, 480# or 650# stainless steel cable, 600# spectra*

      • Maximum loop sleeve crimp size- 2.2mm*

      • SlipShaft™ Front-end Adapter** necessary and sold separately

      • Conventional setup instructions click here.

      • Full SlipShaft™ System Setup instructions click here.

      • Overview view of head with labeling click here

    • SlipShaft™ KT-281 Break-away Head (click to see photo)

      • Made with 17-4 stainless steel

      • Features 2 (two), 3" hard stainless steel flopper barbs*

      • Diameter=~9/32" (see photo for details)

      • Length=~8.5"

      • Weight (including 2 flopper barbs)=~90 grams

      • Recommended leash (tether) line type & size- 300#/400# mono, 480# or 650# stainless steel cable, 600# spectra*

      • Maximum loop sleeve crimp size- 2.2mm*

      • SlipShaft™ Front-end Adapter** necessary and sold separately

      • Conventional setup instructions click here.

      • Full SlipShaft™ System Setup instructions click here.

      • Overview view of head with labeling click here

    • SlipShaft™ KT-281S Break-away Head (Designed for Pole Spear Reef Diving use, click to see photo)

      • Made with 17-4 stainless steel

      • Features 2 (two), 2" hard stainless steel flopper barbs

      • Diameter=~9/32" (see photo for details)

      • Length=~6.7"

      • Weight (including 2 flopper barbs)=~70 grams

      • Recommended leash (tether) line type & size- 300#/400# mono, 480# or 650# stainless steel cable, 600# spectra*

      • Maximum loop sleeve crimp size- 2.2mm*

      • SlipShaft™ 375 Front-end Adapter recommended, necessary and sold separately**

      • Setup for Full SlipShaft™ System click here.

      • Suggested SlipShaft™ System conventional setup instructions click here.

      • Overview view of head with labeling click here

    • New SlipShaft™ KT-312S Break-away Head (Designed for Pole Spear Reef Diving use, click to see photo)

      • Made with 17-4 stainless steel

      • Features 2 (two), 2" hard stainless steel flopper barbs

      • Diameter=~5/16" (see photo for details)

      • Length=~6.7"

      • Weight (including 2 flopper barbs)=~80 grams

      • Recommended leash (tether) line type & size- 300#/400# mono, 480# or 650# stainless steel cable, 600# spectra*

      • Maximum loop sleeve crimp size- 2.2mm*

      • SlipShaft™ 375 Front-end Adapter recommended, necessary and sold separately**

      • Setup for Full SlipShaft™ System click here.

      • Suggested SlipShaft™ System conventional setup instructions click here.

      • Overview view of head with labeling click here

  1. SlipShaft™ 438P-S, 438T-S, 438P-CM & 438T-CM Front-end Adapter**

    • Made with 17-4 stainless steel

    • 438P-S ("P"=secured with 3/32" pin and epoxy glue***/"-S"=spectra) for 5/16" spear shaft (click to see photo)

      • Diameter=~7/16"

      • Length=~2.1"

      • Weight=~27 grams

      • Recommended tether/leash line- 600# Spectra Q-Powerline O.D.=2.2mm (.087”)

      • Conventional setup instructions click here.

      • Full SlipShaft™ System Setup instructions click here.

      • Overview view of adapter with labeling click here

    • 438T-S ("T"=threaded***/"-S"=spectra) for 5/16" spear shaft with 5/16-24 thread pattern (click to see photo)

      • Diameter=~7/16"

      • Length=~2.1"

      • Weight=~27 grams

      • Recommended tether/leash line- 600# Spectra Q-Powerline O.D.=2.2mm (.087”)

      • Conventional setup instructions click here.

      • Full SlipShaft™ System Setup instructions click here.

      • Overview view of adapter with labeling click here

    • 438P-CM ("P"=secured with 3/32" pin and epoxy glue***/"-CM"=SS Cable or Mono) for 5/16" spear shaft (click to see photo)

      • Diameter=~7/16"

      • Length=~2.1"

      • Weight=~27 grams

      • Recommended leash (tether) line type & size- 300#/400# mono, 480# or 650# stainless steel cable*  O.D.=2.2mm (.087”)

      • Conventional setup instructions click here.

      • Full SlipShaft™ System Setup instructions click here.

      • Overview view of adapter with labeling click here

    • 438T-CM ("T"=threaded***/"-CM"=SS Cable or Mono) for 5/16" spear shaft with 5/16-24 thread pattern (click to see photo)

      • Diameter=~7/16"

      • Length=~2.1"

      • Weight=~27 grams

      • Recommended leash (tether) line type & size- 300#/400# mono, 480# or 650# stainless steel cable*  O.D.=2.2mm (.087”)

      • Conventional setup instructions click here.

      • Full SlipShaft™ System Setup instructions click here.

      • Overview view of adapter with labeling click here

  2. SlipShaft™ 375P & 375T Front-end Adapter**

    • Made with 17-4 stainless steel

    • 375P-S ("P"=secured with 3/32" pin and epoxy glue***/"-S"=spectra) made for the following shaft sizes; 6.2mm, 1/4", 6.5mm, 6.75mm, 17/64", 7.0mm & 9/32" (click to see photo)

      • Diameter=~3/8"

      • Length=~2.1"

      • Weight=~21 grams

      • Recommended tether/leash line- 600# Spectra Q-Powerline O.D.=2.2mm (.087”)

      • Conventional setup instructions click here.

      • Full SlipShaft™ System Setup instructions click here.

      • Overview view of adapter with labeling click here

    • 375T-S ("T"=threaded***/"-S"=spectra) made for the following 6.0mm x 1.0 male threaded shaft sizes; 6.2mm, 1/4", 6.5mm, 6.75mm, 17/64", 7.0mm & 9/32" (click to see photo)

      • Diameter=~3/8"

      • Length=~2.1"

      • Weight=~21 grams

      • Recommended tether/leash line- 600# Spectra Q-Powerline O.D.=2.2mm (.087”)

      • Conventional setup instructions click here.

      • Full SlipShaft™ System Setup instructions click here.

      • Overview view of adapter with labeling click here

    • 375P-CM ("P"=secured with 3/32" pin and epoxy glue***/"-CM"=SS Cable or Mono) made for the following shaft sizes; 6.2mm, 1/4", 6.5mm, 6.75mm, 17/64", 7.0mm & 9/32" (click to see photo)

      • Diameter=~3/8"

      • Length=~2.1"

      • Weight=~21 grams

      • Recommended tether/leash line- 400# Mono or 500# SS Cable O.D.=2.2mm (.087”)

      • Conventional setup instructions click here.

      • Full SlipShaft™ System Setup instructions click here.

      • Overview view of adapter with labeling click here

    • 375T-CM ("T"=threaded***/"-CM"=SS Cable or Mono) made for the following 6.0mm x 1.0 male threaded shaft sizes; 6.2mm, 1/4", 6.5mm, 6.75mm, 17/64", 7.0mm & 9/32" (click to see photo)

      • Diameter=~3/8"

      • Length=~2.1"

      • Weight=~21 grams

      • Recommended tether/leash line- 400# Mono or 500# SS Cable O.D.=2.2mm (.087”)

      • Conventional setup instructions click here.

      • Full SlipShaft™ System Setup instructions click here.

      • Overview view of adapter with labeling click here

  3. SlipShaft™ 375T-CS Front-end Adapter

    • 375T-CS (Complete Separation) made for the following 6.0mm x 1.0 male threaded shaft sizes; 6.2mm, 1/4", 6.5mm, 6.75mm, 17/64", 7.0mm & 9/32"

    • Diameter=~3/8"

    • Length=~2.1"

    • Weight=~24 grams

    • Overview view of adapter with labeling click here

  4. SlipShaft™ KT Break-away Head to Pole Spear Adapter

    • This adapter allows you to rig 3-Prong Hawaii's pole spear with our patent pending SlipShaft™ technology and our KT Break-away Head.

    • Made with 7075-T6 Aluminum and 9/32" Spring Stainless Steel

    • Length=~14.5"

    • Weight=~110 grams

    • Click to see photo of adapter

    • More info on our "Prototype" web page click here.

    • View informational and setup video clips of SlipShaft™ Technology and KT Break-away Head applied to a 3-Prong Hawaii Pole Spear below.

Full SlipShaft™ system setup video click here

Suggested Conventional SlipShaft™ system setup video click here

 

*Tempered stainless steel flopper barbs currently available only on heads from Maui Sporting Goods Spearfish. Leash line and loop sleeve crimps are not included because we wanted to give you the option of using the type you prefer and allow for producing your own custom leash line length.

**Seats all SlipShaft™ Break-away Heads

***Special tools and skills are necessary to install pinned type front-end adapter to spear shaft properly. Capable dive shops can install for you and maybe subject to additional installation charge.